HomeAbout usContact usView Cart


Carbon fiber sheet
Carbon fiber cloth
Carbon fiber tape
Carbon fiber tow
Aramid tow
Carbon fiber tubes
Carbon fiber rods
Carbon fiber strip & bar
Epoxy systems
Epoxy fillers
How to use...

 

 

 

 

 

 

.
.

Credit card, direct debit and PayPal acceptedPaypal, credit card, direct deposit

For phone sales and inquiries please phone: 03 90019093

.

.
   
.



Carbon fiber plain cloth - 1270mm wide x 10m long

Carbon fiber plain cloth - 1270mm wide x 10m long



QTY:

Price:


Price per square metre


 

Plain carbon fiber (CF) provides that great 3D appearance and is more rigid than twill for structural parts. Plain CF cloth weave is a one over one under weave pattern.
 
Specifications
Weave
Plain
Warp
3K
Width
1270mm (48")
Length
1m to 100m
Weight
200g/m2 (7oz)
Thickness
.25mm (.00984")
 
How much epoxy resin will I need?
To completely wet out 1mē (1m x 1m) of carbon fiber cloth you will require about 230 to 270g (230-270ml) of mixed epoxy resin. E.g. If you were to make a carbon fiber sheet 1mē with a thickness of 1mm to 1.25mm you would use three layers of 200g carbon fiber and a total of 690 to 810g of resin. Please note this is only a rough guide and the volume of resin used is totally dependant on the techniques used (vacuum bagging, wet lay-up, press set, etc).
 
What will I receive and how will it be packaged?
You will receive a perfect piece of the above carbon fiber cloth in your specified quantity/length X 1270mm width on a cardboard roll inside a protective tube. We never fold our CF cloth. All orders are sent via your specified Australia Post service.
 

 
Plain02.jpg
 
Plain04.jpg
 
   Plain01.jpg


 

.

Privacy policy I Warranty I Shipping I Contact us I Copyright © Carbon Fiber Australia